Telecom Wireless Solutions

Consumers have come to expect five-bar, reliable service from carriers. Whether in remote areas or inside structures made of signal-sapping building materials, there are a variety of choices to improve cell signal and decrease dropped calls. Passive and active distributed antenna systems (DAS) are the most popular go-to solutions.

ceramiteK's engineered solutions have been used by both tier 1 & private network operators

Advantages of CER-PCBS-2.0

-Budget savings during the construction of GSM-R, 4G (LTE), 3G (UMTS), 2G (GSM) networks

-reduction of operating costs: the energy consumption of the system equipment is up to 5 times lower than that of the macro base station

-increase in the coverage area of one base station up to 60 km

LTE/5G ready Picocell base station

CER-PCBS-2.0

CER-PCBS-2.0 is designed to create cellular coverage on railways, highways and in low populated areas. The system provide efficient use of the capacity of the existing network. The complex supports LTE FDD, UMTS, GSM (GSM-R), as well as able to be adopted to 5G networks in the future. It allows you to consistently move the sectors of the base station (BS) at distances up to 60 km, while simultaneously reducing capital and operating costs for the creation and maintenance of cellular infrastructure.

-combined data transmission channel between the system units — fiber optic channel and built—in radio line (replacement of the radio relay system):the working distance between the system units via the radio line is up to 20 km (direct visibility is required)the working distance between the system units via the fiber optic channel is up to 60 km (without line of sight)Operation of Internet of Things (IoT) services: In-Band NB-IoT

-built-in remote control system for each device entering the system

The FSC unit is installed on the site with the base station. It receives carrier frequencies (GSM-R, GSM, LTE, UMTS standards) from the BS, converts them into a relay channel (radio line or fiber-optic channel) and transmits to a remote distance. The FSR unit installed at a remote site receives carrier frequencies via a radio line or fiber-optic channel and provides signal from several sectors, similar to a base station (one carrier per sector). Also, the FSR unit amplifies and transmits the received signals further along the chain to the next site with CER PCBS 2.0 equipment installed. The Service channel module (SM) is designed to create additional sectors on the site with the FSR block and to enable the system to work in MIMO mode.

LTE/5G ready Picocell base station

CER-PCBS-2.0-FSC

Modules:

- The FSC unit is designed to convert several carrier frequencies of LTE, UMTS or GSM (GSM-R) received from the base station (BS) into internal CER PCBS 2.0  system

- The FSR unit is designed to receive and convert carrier frequencies using a radio line or fiber-optic channel into cellular signals,

- The relay channel module (RM) ensures the operation of the built-in radioline

- The service channel module (SM) provides additional sectors on the remote site where the FSR unit is installed

Applications for CER-PITX

-IoT

-Video Analytics

-Neural Network processing

Pico-ITX module

CER-PITX

- Qseven 1.2 and 2.0 Modular Platform AMD System-on-Chip

- CPU2.0 GHz CPU4 x86 cores2 Mb L2 CacheTDP

-25W Integrated Video GPU HD 8400E 600 MHz

-RAM 2-4 GB DDR3-1600

-Programmable controller STM32

-USB 2.0 Connectors: 4 on board, 2 external

-1G EthernetConnectors

-HDMI connector

-PCIe, mini PCIe, mSATA connector

-External connectors: 2x RS232, CAN

-Compact Pico-ITX form factor (100x72 mm)

Applications for CER-P6A:

-Mining

-Big data Analytics

-Neural Network processing

-Blockchain

FPGA Acceleration Card

CER-P6A is a reconfigurable accelerator in a Half-Size PCIe form factor.

Features:

- Up to 1.5 TFLOPS of computing power per accelerator

- more 3000 DSP core units

- 2 independent DDR4 banks (each bank up to 16GB)

- FMC extension modules

-PCIe Gen 3.0 x 8 lanes

-Consumption (typical) 30-40 W

-OpenCL BSP (HPC)

-Form Factor: Half-height, half-length PCI Express card

168 mm x 69 mm x 28 mm

Applications for CER-P4A:

-Mining

-Big data Analytics

-Neural Network processing

-Blockchain

Reconfigurable FBGA Based Accelerator Card

CER-P4A Reconfigurable accelerator in a Half-Size PCIe form factor with 2SFP+ and 2QSFP  .

Features:

- Up to 1 TFLOPS of computing power per accelerator

- 2 independent DDR3 banks (each bank up to 16GB)

- SFP+ X 4 port ( or SFP+ X 2 port + QSFP X 2 port )

-40 pin GPIO, 8x  GTX transceivers

-PCIe Gen 2.0 x 8 lanes

-Consumption (typical) 30-40 W

-OpenCL BSP (HPC)

-Form Factor: Half-height, half-length PCI Express card

-168 mm x 69 mm x 28 mm